2015_march_software_list_download_crack

[Other EDA] Frontline Genesis 2000 v10.01B3
[DELCAM] Delcam PowerSHAPE 2015 R2
 [Other CFD] Siemens LMS Virtual.Lab Rev 13.2 Win64
[Other CFD] Metacomp CFD++ v14.1.1
[Dassault CATIA ] CATIA V5-6R2014 SP4 HotFix16
 [SolidWorks] R&B MoldWorks 2013 SP0.8 for SolidWorks 2012-2015
 [Biomedicine] Materialise 3-matic 9.0 STL
 [Biomedicine] Materialise MAGICS RP v19
 [Other EDA] Infolytica MotorSolve 5.0.1
 [Other CAD/CAM] Edgecam 2015 R1 SU2 Update
 [Dassault CATIA ] CATIA V5-6R2012 SP6 HotFix20
 [petroleum] Plate.n.Sheet.v4.10.16.e
[MSC] MSC Apex 2014 Black Marlin win64
 [Cadence] Cadence SPB OrCAD 16.60.044 Hotfix
 [DELCAM] Delcam.Crispin.Engineer.2015.R1
 [petroleum] Schlumberger AquiferTest 2015.1
 [Other CFD] Siemens NX Nastran 10.1 Win64
 [BENTLEY] Bentley Microstran 09.20.01.35
 [PTC] PTC Mathcad Prime 3.1 F000
[Other EDA] Antenna Magus 5.3.0 Pro
[Mould Processing] AutoForm Plus R5.2.4 HotFix Win64.Linux64
 [Other EDA] Siemens LOGO!SoftComfort v8.0.0
 [Structural Analysis] CSI ETABS 2015 v15.0.0.1221
 [Other CAD/CAM] IronCAD Design Collaboration Suite 2015 v17.0
 [Other EDA] Cedrat Flux v12.0
 [Development ] Geostru Slope 2015 v25.5.1204
[Optics] Lumerical Suite 2015a Linux
 [DELCAM] Delcam Crispin PatternCut 2014 R2 SP2
[Geological Prospecting ] LizardTech.GeoExpress.v9.0.1.3818
 [Development ] Geostru SPW 2015.30.3.592
 [Siemens ] Siemens.PLM.NX.v10.0.1.MR1.Update
 [DELCAM] Delcam Crispin ShoeCost 2015 R1 SP1
 [Water Conservancy] Schlumberger.Visual.MODFLOW.Pro.Classic.Interface.v4.6.0.166
 [Structural Analysis] HEADS Site Release 14.1
 [Other CFD] Safe.Software.FME.Server.v2015.0.15253
[Other CAD/CAM] CorelCAD.2015.v15.0.1.22
 [SolidWorks] SolidWorks Enterprise PDM 2015 SP2.0 Multilanguage
 [SolidWorks] DriveWorks Solo v11 SP3
 [Other EDA] Altera Quartus II v14.1 Update1
 [Structural Analysis] ASTRA Pro v15.0
 [Other CFD] STAR-CCM+ v10.02.010.Win64&Linux64
 [DELCAM] Delcam Crispin ShoeMaker 2015 R2
 [DELCAM] Delcam DentCAD 2015 R1
 [Other CAD/CAM] MasterCAM.X8.HotFix.4.v17.0.19735.0
 [BENTLEY] Bentley Rail Track V8i SS2 v08.11.07.68
 [Other CFD] HEEDS.MDO.2014.07.Win64 & Linux64
 [SolidWorks] SolidWorks 2015 SP2.0 Full Multilanguage
 [Other CAD/CAM] GeoMagic.Design.Direct.v2014
 [Other CFD] ESI Visual-Environment v10.0 Linux64
 [PTC] PTC Creo 3.0 M030 with HelpCenter
[Other CFD] Altair HW AcuSolve 13.0.301 HofFix
 [Math Statistics] FTI FastBlank 2014 for ProE WF5-Creo 3.0
 [Other EDA] Infolytica elecnet 7.05
 [Other EDA] Infolytica MotorSolve 5.0
 [Other EDA] JMAG-Designer 14.0.01t
 [Structural Analysis] BIMware MASTER EC2 Reinforcement 2015 v6.0.0
 [Autodesk] CGS Infrastructure Solutions 2015 v2.0.164 build 252
 [Other EDA] Altium CircuitStudio 1.0.4 build 41208
 [Chemical] CAESAR II 2014 v7.0 with sp1
 [SolidWorks] SPI SheetMetalWorks 2015 for SolidWorks 2015
 [ANSOFT] Ansoft HFSS Antenna Design Kit v2.15
 [Other EDA] Altium Designer 15.0.14 Build 40656
 [Other CFD] ESAComp 3.5.008
 [petroleum] Intergraph.SmartPlan.Spoolgen.Isometrics.2014
 [Other CAD/CAM] ITI TranscenData CADfix v10 x64
 [Other CFD] AVL_Fire_2014.0_Win64_Linux64
 [Other CAD/CAM] Elysium CADDoctor EX 6.1

• Contact:crackcad@gmail.com

2015_Latest_cracked_software_download

[Other CAD/CAM] SolidThinking Suite (Evolve + Inspire) 2014.3969
[Siemens] Siemens NX Nastran 10.0
[Water Conservancy] Aquaveo Groundwater Modeling System v10.0.6
[MENTOR] Mentor Graphics FloTHERM XT v2.0
[Geographic Information] Maplesoft MapleSim v7.01 FOR WIN_LINUX
 [petroleum] SimSci PRO II v9.30
[SolidWorks] R&B ElectrodeWorks 2014 SP0 for SolidWorks 2012-2015
 [SolidWorks] GeometryWorks 3D Features V15.0 for SolidWorks 2015
 [DELCAM] Delcam PowerInspect 2015 Multilang
 [DELCAM] Delcam PowerSHAPE 2015 R1 SP4 Update
 [BENTLEY] Terrasolid apps v015.001 for Bentley Microstation V8i
 [UGS] Siemens_NX_9.0.3_MP04_Linux64_win_Update
 [Other CAD/CAM] Solid Edge ST7 MP04 Update
[Other CFD] Altair SimLab v13.2 for HyperWorks 13.0 Linux64
[Other CFD] Altair SimLab v13.2 for HyperWorks v13.0
 [Other CFD] ESI Visual-Environment v10.0 for Win32_64
 [Other CFD] Altair HyperWorks Solvers 13.0.210 Update Only Win64
 [petroleum] M4 P&ID FX v6.0
 [DELCAM] ARTCAM 2103
 [DELCAM] POWERMILL 2015 SP6
 [Development ] HVAC.Solution.Pro.v7.5.1
 [BENTLEY] Bentley.STAAD.Pro.V8i.SS5.v20.07.10.66
 [ANSYS] Ansys Electromagnetics Suite v16.0
 [Chemical] Intergraph PVElite 2015
 [Other CAD/CAM] CAMWorks Nesting 2015 SP0.0 for SolidWorks 2015
[ANSYS] Ansys.Products.v16.0.Linux64
 [Other CAD/CAM] SolidCAM 2015 SP1 Multilingual
[BENTLEY] Bentley MXROAD Suite V8i SS4 08.11.09.789
[BENTLEY] Bentley GeoStructural Analysis(GSA) v19.00.39.00
 [Other CAD/CAM] Ansys spaceclaim 2015
 [Geographic Information] Midland Valley Move 2015 win64
 [BENTLEY] Bentley Power GEOPAK V8i SS4 08.11.09.788
 [petroleum] Intergraph CADWorx Draftpro 2015 v15.0
 [DELCAM] Delcam DentCAD 2014 R4
 [ANSYS] ANSYS PRODUCTS V16 WIN64
 [BENTLEY] Bentley.gINT.Pro.Plus.SS2.v08.30.04.26
 [Chemical] Chemstations.CHEMCAD.Suite.v6.5.5.7318
 [Autodesk] Orange.CADPIPE.Gen2.v3.1.for.AutoCAD.2014-2015
 [Siemens] Siemens Tecnomatix Plant Simulation 12.0
 [SYNOPSYS] synopsys tetraMax vI 2013.12 SP5
 [SYNOPSYS] synopsys vcs 2014
 [SYNOPSYS] synopsys leda 2014
 [SYNOPSYS] synopsys coretools 2014
 [SYNOPSYS] synopsys Verdi 2014
 [Other CFD] nCode DesignLife 10
 [MSC] Msc patran 2014
 [MSC] MSC.Nastran.2014
 [MSC] MSC Sinda V2014
 [Cadence] Cadence IC v6.16.090
 [Cadence] cadence Incisiv 14.10
 [Other EDA] Keil.products.from.ARM.2015.1
 [petroleum] Sunrise.Pipenet.v1.7.1.1020
[Cadence] cadence MVS 14.21
 [Cadence] cadence EXT (QRC Extraction)14.15
[Cadence] cadence CONFRML 14.20
[Optics] ElumTools 2015
[Optics] LightTools 8.2
 [AGILENT] Agilent GoldenGate 2015
[Siemens] NX 8.5.3 MP08 Linux64 Update
 [Other CAD/CAM] Geometric Glovius Professional v4.0.0.145
 [SolidWorks] NeiWorks v2.1 SP1.0 for SolidWorks
 [Other CAD/CAM] CAMWorks 2015 SP0.1 for SolidWorks
 [Other CAD/CAM] Think3 ThinkDesign 2014
 [Other CFD] Altair HyperWorks Desktop v13.0.110
 [DELCAM] Delcam Crispin ShoeMaker 2015 R1 SP2
[Other CAD/CAM] 3D Systems Geomagic Design X v4.1.1.0
 [Other CFD] NeiNastran Editor v10
 [petroleum] Intergraph CADWorx 2015 HotFix 1
 [petroleum] Tecplot Suite 2015.1
 [WORKNC] WorkNC v23
 [SolidWorks] Logopress3 2015 SP0.3 for SolidWorks
 [SolidWorks] iMold.v12.SP5.1.Premium.for.SolidWorks
 [SolidWorks] 3DQuickPress v6.0.0 for SolidWorks
 [Other EDA] Silvaco TCAD 2014
 [Water Conservancy] Aquaveo.SMS.v11.2
 [Cadence] Cadence Encounter RTL Compiler v14.21
 [Virtual Reality] MVTec HALCON 12
 [Virtual Reality] LumenRT GeoDesign 2015
 [Cadence] Cadence EDI 14.2
 [Dassault CATIA ] Geovia Minex v6.4.0
 [Other CFD] SIMULIA Isight v5.9.2
 [Other CFD] NeiNastran.v9.2.3
 [petroleum] Tecplot 360 EX 2015 R1 v15.1.0.56876
 [Other CFD] Simufact Welding 4.0.1
 [Chemical] Intergraph SmartSketch 2014
[Other CFD] Future Facilities 6SigmaDC R9
 [Siemens] VoluMill v6.1.0.2416 for NX10.0
 [Other CFD] CD-Adapco Star CCM+ 9.06.011
 [Other CFD] ITI SimulationX 3.6.4
 [SolidWorks] EMS HFWorks 2013 SP1.0 for SolidWorks 2013
[PTC] PTC Creo Expert Moldbase Extension 9.0 F000
 [Other CFD] LMS.Imagine.Lab.AMESim.R13.SL2
 [SolidWorks] 3DQuickMold 2014 SP2.0 for SolidWorks 2011-2015
 [petroleum] Invensys SimSci-Esscor PRO/II v9.2.2
 [Other CAD/CAM] MasterCAM.X8.HotFix.4.v17.0.19008.0
 [Geographic Information] Merrick MARS v8.0.3.8140
[MSC] MSC Marc 2014
 [Geographic Information] ESRI ArcGIS Desktop 10.2
 [Optics] ORA CODE V v10.7
 [Optics] Lumerical Suite 2015a for win32_win64

• Contact:crackcad@gmail.com

Downstream_CAM350_V11_ blueprint_v4.0_CRACK_tutorial

CAM350 for PCB Designers and Electrical Engineers
CAM350 will import your CAD database or you can choose to import Gerber files. It will then verify that the electrical characteristics match the design intent. Errors can occur in translation such as accidental inclusion of non electrical items in Gerber output or problems with manual separation of voltages on a plane layer. CAM350 will graphically match up original design files with Gerbers to ensure accuracy by locating any disparities.

CAM350 also offers Design Rule Checks (DRC) to verify the Gerber layers match the design rules in your CAD system and the capabilities of your fabricator as well. CAM350's Design for Fabrication (DFF) tools insure the board not only matches manufacturing capabilities, but also searches out design flaws that may affect yields resulting in missed deliveries and delayed product release.

CAM350’s Design for Fabrication (DFF) Analysis pulls fabrication rules into the PCB design domain and presents them in a way that is understood by the PCB designer. DFF Analysis verifies the PCB database to find issues that may cause problems when entering into the fabrication process.

Directly import your design data for true WYSIWYG representation
Analyze, identify, and fix manufacturing flaws that may cause delay
Inspect for etching, soldermask, thermal, and spacing violations
Verify and maintain design integrity and intent
Easy to learn, use and implement


CAM350 for CAM Engineers
CAM350 automates the PCB CAM engineering department by preparing and optimizing the design files for fabrication. Getting designs quickly through fabrication is a very complex process and effectively managing each operation is the key to moving into high-volume production. With a solution for every operation, CAM350 manages data input and preparation, through analysis, test, mill and drill to final bare-board production.

Any complication during fabrication will make the job time consuming and labor intensive, decreasing profitability. CAM350 can safeguard against these setbacks.

When using CAM350, the CAM engineer will accurately prepare, optimize and process the design data. CAM350 will perform an in depth analysis of the data to locate manufacturing violations, it will create optimized mill and drill files, prepare test data, and produce panelization strategies, all resulting in an automated, highly effective process.

Seek out and repair manufacturability flaws in the design
Create NC files quickly and accurately
Optimize the drill and mill machine performance
Streamline tooling with panelization functionality
Extract the essential data to drive test equipment
Optimize test machine performance and probing time
Identify collisions, break-outs, and un-probable conditions

MVTec_HALCON_12_download_tutorials_crack

Matching, Measuring, 3D Vision, Morphology, Blob Analysis

Calibration, OCR & OCV, Bar Code & Data Code Reading, and more

Easy Programming in C, C++, and .NET languages like C# or VB.NET

Integrated Development Environment HDevelop

Support of Multi-Processor/-Core Comput

Highlights

The solution for the full range of applications in the field of machine vision and board, wafer & die inspection, medical image analysis, automotive and robotics, surveillance, and remote sensing

Large library of more than 2000 operators for low, medium, and high level image processing

Integrated development environment (IDE) for machine vision: HDevelop

Easy programming in C, C++, C#, Visual Basic .NET, and Delphi

Usage: product development, research, and education

Available for 32/64-bit Windows Vista / 2008 / 7 / 2012 / 8, 64-bit Linux, OS X 10.8 / 10.9 / 10.10

Support of multi-core and multiprocessor computers

High performance by using SSE2 and AVX, as well as automatic GPU acceleration

Support of hundreds of industrial cameras and frame grabbers, also for standards like GenICam, GigE Vision, IIDC 1394, USB, USB3 Vision, and Camera Link

Features

Revolutionary methods for 3D vision

Matching to find even rotated or partly occluded objects

Blob analysis with more than 50 shape and gray value features

High-accuracy measuring

Optical character recognition and verification (OCR/OCV)

Arbitrarily shaped regions of interest (ROIs) for significant flexibility and speed

Detection of lines, circles, and ellipses with an accuracy of up to 1/50 pixel

Extremely fast morphology

Color image processing

Processing of extremely large images (more than 32k x 32k) without a limit

Image sequence processing (e.g., for surveillance tasks)

Accurate 3D camera calibration

And much more ...

LightTools_v8.2_download_tutorial

LightTools Features

LightTools delivers true design capabilities, accurate analyses, and high-powered product visualization features that will help you get illumination systems to market faster. Explore LightTools’ key features in more detail to find out how it can meet your specific illumination design needs.

Rapid Model Creation with LightTools LightTools’ robust design features help you quickly and efficiently create and modify your illumination system design, from initial concept phases to subsequent engineering iterations and refinements. Key design features Sophisticated solid modeling with full optical accuracy State-of-the-art ray tracing speed, with full user control of accuracy and resolution requirements Create a light source from any geometric model, for unlimited flexibility to create custom sources Application-specific utilities to help you quickly build a complete model Extensive source and materials libraries, including LEDs and BSDF measurements Robust data exchange support for mechanical CAD data Interactive, dynamic link with SolidWorks® Multiple immersion for modeling the embedded phosphor in an encapsulated LED Fully optimizable skinned solids for creating efficient LED couplers, solar concentrators, and other complex optical surfaces User-defined materials to model phosphor-based white LEDs Textures – 2D, 3D, and user defined – with flexibility to vary the shape, size, and spacing of texture elements Calculate the color rendering index (CRI) on any receiver – ideal for LED and luminaire design Intensity data collection that enables data exchange with other lighting design software through the IES and LDT data formats Point-and-shoot ray tracing for real-time, immediate feedback on your system’s light behavior during design iterations

Reach the Best Design Solution Faster with LightTools Optimization LightTools is the first illumination design and analysis software to deliver a fully integrated system optimization tool. The LightTools optimization module improves the performance of virtually any type of illumination system, and gives designers tremendous flexibility to choose from hundreds of system parameters to designate as variables in order to achieve specified luminance, illuminance or output intensity distribution goals. Key optimization features Full integration with LightTools 3D solid modeling ensures that the optimizer delivers practical, realistic solutions that yield the best possible system performance, in a fraction of the time it would take to accomplish manually Augmenting the capabilities of the LightTools optimizer is the parametric controls feature. Used in conjunction with the optimizer or in earlier stages of system design, this feature improves parameter management efficiency; by enabling the properties of various system elements to be associated, parametric controls permit global changes on a model to be accomplished by varying a single parameter. Backlight Pattern Optimization for automatic design of backlight extraction patterns for LCDs, cell phone key pads, and automotive instrument clusters Parameter Sensitivity analysis for selecting the best set of variables prior to system optimization Support for optimization of optical elements, parts, and assemblies dynamically linked from SolidWorks®

Worknc_v23_tutorials_crack

WorkNC CAM software is the premier automatic CNC software for surface or solid models in mold, die and tooling businesses for 2 to 5-axis CNC programming. WorkNC is used by all western, Japanese and Korean automotive makers and well-known OEMs from a range of other industries.

WorkNC is best of breed, complementary CAM software that enhances all design and manufacturing systems by providing the most reliable, efficient, easy-to-program cutter paths, resulting in unmatched productivity and safety.

WorkNC 5-Axis Machining

WorkNC brings the benefits of 5-Axis machining to all users by taking the complexity out of 5-Axis machining. WorkNC 5-Axis includes powerful, easy-to-use programming and integrated collision avoidance.

With WorkNC, 5-Axis programming is easy, safe and reliable allowing you to automatically generate 5-Axis toolpaths for the majority of your jobs. 

Features at a glance

• Efficient toolpath generation
• Easy toolpath preparation based on guide curveset, sections or surfaces.
• Auto 5: Automatic conversion of 3-Axis toolpaths to 5-Axis
• Specialized strategies for individual applications such as trimming, pocketing, blade and tube machining, impellers and laser cutting
• Complete simulation.

WorkNC Auto 5

WorkNC Auto 5 is a truly unique and revolutionary innovation in the field of 5-Axis machining. Users can now automatically generate 5-Axis toolpaths based on existing 3-Axis toolpaths while taking into account the specific kinematics of the 5-Axis milling center selected.

WorkNC Auto 5 automatically generates collision free 5-Axis toolpaths from existing 3-Axis toolpaths. It enables the use of short, rigid cutters and allows more of the job to be finished in one setting, reducing the number of electrode burning operations required to finish a component.

Lumerical_FDTD_Solutions 8.11 _tutorial_download

FDTD Solutions is a 3D Maxwell solver, capable of analyzing the interaction of UV, visible, and IR radiation with complicated structures employing wavelength scale features.

FDTD Solutions empowers designers to confront the most challenging photonic design problems. Rapid prototyping and highly-accurate simulations reduce reliance upon costly experimental prototypes, leading to a quicker assessment of design concepts and reduced product development costs. FDTD Solutions can facilitate your success in diverse application areas, from fundamental photonics research to current industrial applications in imaging, lighting, biophotonics, photovoltaics, and many more.

• Highly-optimized computational engine able to exploit multi-core computing systems in everything from laptops to high-performance computing clusters.
• Broad operating system and hardware support (including Amazon EC2) enables for high throughput design assessment on all available leading-edge computational systems.
• Parallelized parameter sweep/optimization framework combined with concurrent computing on multiple computers allows for rapid virtual prototyping.
• Proprietary multi-coefficient material modeling capability combined with Lumerical’s flexible material framework accurately accounts for broadband linear material dispersion as well as nonlinear, gain and anisotropic effects.
• 
  

2014 New software for download,tutorials,training

[Other CAD/CAM] Mastercam X8 HotFix 3_ v17.0.17986.0_Win64
[DELCAM] Delcam PowerInspect 2014 SP1
[petroleum] kingdom suite 2015
 [UGS] Siemens.NX.v10.0 Engineering DataBases
 [Other CFD] Siemens LMS Virtual Lab Rev13.1
 [Other EDA] CST Studio Suite 2014 SP6 Updat
 [PTC] PTC Creo 3.0 M020
 [Structural Analysis] DIGICORP Ingegneria Civil Design v10.0 for Autodesk AutoCAD 2015
 [Structural Analysis] ADAPT.PT.RC.2014.2
 [petroleum] Zeataline.PipeData.Pro.v9.3.2
 [SolidWorks] nPower.PowerSurfacing.v2.00.9465.for.SolidWorks2015
 [UGS] SIEMENS NX v10.0.0 Mold Wizard EasyFill Advanced
 [Structural Analysis] CSI Etabs 2013 v13.2.2
 [petroleum] Petrel 2014_DomainVideos_v1.5
 [petroleum] WinSim Design II V14
 [Other CAD/CAM] GibbsCAM_2014_10.7.19.0
 [Other EDA] Antenna Magus Pro 5.2
[Other EDA] Altera Quartus II version 14.1
 [Roads_Bridges] Adapt Builder v2012.3
[Geological Prospecting ] Blue Marble Geographic Calculator 2015
 [UGS] SIEMENS PLM NX 10 FOR WIN/LINUX
 [Structural Analysis] MechaTools.ShapeDesigner.2013
 [petroleum] schlumberger forgas v10.5.5
 [Geographic Information] Schlumberger Eclipse 2014
 [Other EDA] Frontline Genesis 2000 v10.01B2
[PTC] PTC_Creo_2.0_M130
 [SolidWorks] DS.SolidWorks.Enterprise.PDM.2015.SP1.1
 [Geographic Information] SPT Drillbench Suit 6.2
[Other CAD/CAM] VERO AlphaCAM 2015 R1
 [AGILENT] Agilent.Electromagnetic.Professional(EMPro).2015.0
 [Geographic Information] ET SpatialTechniques Products v11.2 for ArcGIS
 [MENTOR] Mentor Graphics Expedition Enterprise Flow(EE) VX.1
 [Other CAD/CAM] MicroSurvey.CAD.2015.v15.0.3.1574
 [Other CFD] CEI.Ensight.10.1.2b.GOLD.WINDOWS.MAC.LINUX
 [DELCAM] Delcam_Crispin_ShoeMaker_2015_R1_SP1
 [Dassault CATIA ] DS_CATIA_Composer_V6R2015
 [AGILENT] Agilent Advanced Design System ADS 2015.1
 [SolidWorks] SolidWorks 2015 With SP1.0
[SolidWorks] SolidCAM 2014 SP3 HF2
 [Other CAD/CAM] VERO EDGECAM V2015 R1
[Other CAD/CAM] InventorCAM 2015
[Other CFD] CAE Linux 2013 Win64
 [petroleum] Schlumberger.Hydro.GeoAnalyst.2014.2
 [petroleum] Schlumberger.AquiferTest.Pro.2014.1
[petroleum] Schlumberger AquaChem 2014.2
 [MENTOR] Mentor.Graphics.QuestaSim.v10.2c
 [Other EDA] Xilinx.Vivado.Design.Suite.2014.4
[AGILENT] Agilent.89600.Vector.Signal.Analyzer.v18
 [petroleum] Intrepid.Geophysics.GeoModeller.2014.v3.2.0
 [petroleum] Intergraph CADWorx 2015
[Management] Palisade @RISK v6.3.1
[Dassault CATIA ] Theorem.Solutions.CADverter.17.3.CATIAV5
 [Other CFD] CFTurbo_9.2.8
 [Mould Processing] AutoForm Plus R5.2.3 HotFix
| [Other CFD] XYZ TRUEGRID V3.10
 [Biomedicine] Schrodinger Suite 2014
 [BENTLEY] Bentley ProStructures V8i (SELECTseries 7) 08.11.11.297
 [Development ] Intel.Parallel.Studio.XE.2015.Update.1
 [Other EDA] Polar Instruments si900e 2013 v13.2
 [Other EDA] Mician mWave Wizard V7.10
[Geographic Information] Schlumberger Techlog 2014
 [Other EDA] SIMetrix pro 7.1
 [Other EDA] Sonnet Suite Pro v15.52
 [Water Conservancy] Aquaveo Watershed Modeling System(WMS) v9.1.12.0
 [petroleum] Invensys.SimSci-Esscor.DYNSIM.V5.2.1
 [Other EDA] Polar_Instruments_Speedstack_2013
 [Other EDA] Tanner Tools v16.12
 [Animation] Quixel.Suite.v1.8.x64
 [Dassault CATIA ] CATIA_V5-6R2014_SP4_Update
 [Development ] Indusoft.Web.Studio.v7.1.SP3.Multilingual
 [Other CFD] Dassault Systemes Simulia Abaqus v6.13.SP4
 [Other CAD/CAM] CYPE CypeCAD 2014h
 [SolidWorks] SolidCAM 2015 for SolidWorks 2012-2015
 [Other CFD] AVL.Workspace.Suite.v2014.Linux.win
[Other EDA] Nuhertz_Filter_Solutions_2014
 [Other CAD/CAM] InventorCAM 2014
 [Other EDA] Infolytica MotorSolve 4.1.1
[Other CAD/CAM] SolidCAM2014_SP3_HF1
 [Other EDA] NI.LabVIEW.2014.V14.01
[Other EDA] CST Studio Suite 2014 with SP5
[BENTLEY] Bentley OpenPlant Modeler V8i SS5 08.11.09.440
 [BENTLEY] Bentley ProjectWise V8i SS4 08.11.11.590
 [Math Statistics] Trimble Business Center HCE 3.20
 [Other EDA] FABmaster v8G2
 [Other EDA] Mathworks Matlab R2014b for linux
[Mould Processing] Stampack v6.1.1
 [Other EDA] Etap PowerStation v12.6
 [Math Statistics] Trimble Business Center v3.4
 [SolidWorks] Logopress3.2015.SP0.2
 [Geographic Information] Pitney.Bowes.MapInfo.Pro.v12.5.1.122
 [Other CAD/CAM] SolidThinking Design 2014 build 3966
[Control] Automation Studio 6.0
 [Other CFD] PumpLinx V3.4.3
 [Other CAD/CAM] HiCAD 2014 Service Pack 2
[BENTLEY] Bentley Map Enterprise V8i SS4 08.11.09.503
 [PTC] PTC Creo Elements Pro 5.0 M250
 [Optics] Lumerical_FDTD_Solutions 8.11
 [Optics] lumerical_MODE_Solutions_7.5.318
 [Other EDA] Altium Designer 15.0.7 Build 36915
 [Other EDA] CAM350 V11 with blueprint v4.0

• Contact:crackcad@gmail.com

Agilent-Advanced-Design-System-ADS-2015-Crack

Advanced Design System (ADS)
Advanced Design System is the world’s leading electronic design automation software for RF, microwave, and high speed digital applications. In a powerful and easy-to-use interface, ADS pioneers the most innovative and commercially successful technologies, such as X-parameters* and 3D EM simulators, used by leading companies in the wireless communication & networking and aerospace & defense industries. For WiMAX™, LTE, multi-gigabit per second data links, radar, & satellite applications, ADS provides full, standards-based design and verification with Wireless Libraries and circuit-system-EM co-simulation in an integrated platform. Watch our ADS 30-Second Demos to see the powerful and easy-to-use ADS interface in action.

Key Benefits of ADS

Complete, integrated set of fast, accurate and easy-to-use system, circuit & EM simulators enable first-pass design success in a complete desktop flow
Application-specific DesignGuides encapsulate years of expertise in an easy-to-use interface
ADS is supported exclusively or months earlier than others by leading industry and foundry partners
Advanced Design System (ADS) continues to lead the RF EDA industry with the most innovative and commercially successful technologies, including Harmonic Balance, Circuit Envelope, Transient Convolution, Keysight Ptolemy, X-parameter*, Momentum and 3D EM simulators (including both FEM and FDTD solvers). With ADS’s Wireless Libraries and circuit-system-EM co-simulation technology, ADS provides full, standards-based design and verification within a single, integrated platform.

Download the ADS Key Features PDFKey Features
Complete schematic capture and layout environment
Innovative and industry leading circuit and system simulators
Direct, native access to 3D planar and full 3D EM field solvers
Largest number of process design kits (PDKs) developed and maintained by leading foundry and industry partners
EDA and Design Flow Integration with companies such as Cadence, Mentor, and Zuken
Optimization Cockpit for real-time feedback and control when using any of 12 powerful optimizers
X-parameter model generation from circuit schematic and Keysight's NVNA for nonlinear high-frequency design
Up-to-date Wireless Libraries enable design and verification of the latest emerging wireless standards

• Please contact:crackcad@gmail.com

Lumerical_MODE_Solutions_Ver.7.5_tutorial_download

Comprehensive waveguide design environment for the analysis and optimization of planar integrated optical waveguides, components and fibers

MODE Solutions’ variational FDTD (varFDTD) solver can efficiently simulate the propagation of optical fields in time without making any assumptions about an optical axis or the materials used. The built-in frequency domain monitors automatically perform the necessary calculations to return the continuous-wave results.

This propagation capability is based on an FDTD technique customized for omni-directional propagation within waveguide components. This method employs a highly optimized computational engine, as well as advanced meshing routines.  The combination of this propagation capability and the eigenmode solver technology provides engineers with the ideal environment for virtual prototyping of large-scale high index contrast waveguide components, reducing the need for expensive, time-consuming manufactured prototypes.

Eigenmode expansion (EME) solver

Figure 2:(Right) The transmission as a function of taper length for the spot-size converter in [1] (also pictured on the left side) calculated using the EME solver and 3D FDTD. The EME simulation takes about 1 minute to simulate 101 different taper lengths (blue squares), whereas the same device simulated in 3D FDTD takes about 6 hours for 11 different taper lengths (green squares).

The EME method is a fully vectorial and bi-directional technique to solve Maxwell's equations. The methodology relies on the modal decomposition of electromagnetic fields into a basis set of eigenmodes, which are computed by dividing the geometry into multiple cells and then solving for the modes at the center of each cell.  Scattering matrices for each cell are formulated by applying boundary conditions at the interface between each cell. The solution to each cell is then propagated bi-directionally to calculate the total transmission and reflection of the device, as well as the final field profile. The EME method has several advantages over other propagation methods:

• Beam propagation methods (BPM): unlike BPM, which relies on a slowly varying envelope approximation, the EME method makes no such approximations and is a rigorous technique. The accuracy of BPM also becomes compromised for propagation at large angles, or in components with high refractive-index contrast, making it unsuitable for photonic components manufactured from silicon or other high index contrast material systems.
• Finite-difference time-domain (FDTD) methods: the EME method scales exceptionally well with propagation distance and is an ideal method for simulating long structures whereas FDTD-based methods, while rigorous, exhibit significant increases in simulation times as the length of the device increases.
• Please contact:crackcad@gmail.com

OPTIS_OptisWorks_2014_download_tutorial

The market leading toolset for optimizing light in any system directly in SolidWorks

Light Modeling

This package has been defined to help you industrial designers and optical engineers to better understand the behavior of your lighting systems, and finally to optimize it.

• Especially recommended for a first approach to optical simulation in CAD CAM world.
• Non-optics specialists will find it particularly easy to use
• This module allows you to create any optical model by applying optical properties to all surfaces, materials and light sources.
• After defining the optical mockup, you will be able to visualize the rays as they propagate in the mechanical system.
• This module allows you to simulate and analyze the photometric efficiency of your lighting systems. This is made possible through several tools for illuminance (lux, footcandle....) , luminance (cd/square meter), intensity (candela...).
• Propagation takes into account optical properties for surfaces, materials, and source emission. Results (photometry maps, cross-sections, point measurements..) can be used to verify compliance with International Standards or specifications, and even exported to other software solutions.
• This module comes complete with intelligent abilities to create interactive simulations where rays are propagated through 'active' components in the 3D view. Moreover the rays are propagated with their wavelength information for further analysis by you. Advanced scattering, anisotropic surface & diffusive material generator are also available.
• 
  

  Optical Shape Design

  
  
  Optical Shape Design (OSD) completes OptisWorks with automatic geometry generation dedicated to optical and lighting system design within SolidWorks.
  SPEOS OSD provides an intuitive and powerful suite of tools to create lighting components such as reflectors, lenses, … from both mechanical and optical specifications. It complements SolidWorks geometric features.

  
  

  Being fully integrated into SolidWorks, OptisWorks OSD avoids all data transfer tasks and the associated drawbacks (failures, loss of accuracy, time taken). Beyond this, it takes advantage of the standard capabilities of modern CAD tools.

  
  

  From the early conceptual phase, OSD enables designers without advanced optical knowledge to quickly and easily investigate different style options even before the selection of a supplier.
  
  Please contact:crackcad@gmail.com

Mastercam_x8_crack_download_tutorials

Mastercam X8's sleek interface and crisp graphics are the first things you will notice. But it’s the streamlined workflow, toolpath advancements and Dynamic Motion efficiencies that will make the biggest impact on your work environment and profitability.

Enhanced usability and workflow
Streamlined interface and enhanced graphical interaction simplify your work.

Expanded Dynamic Motion
Mastercam's signature technology is more efficient than ever.

Easier multiaxis cutting
Use 5-axis techniques on traditional 3-axis toolpaths.

New solid model prep
Push-pull modeling and editing, feature identification and editing, and more.

Powerful Mill-Turn additions
Support for new machines and new strategies bring added flexibility.

Multiaxis Roughing

Multiaxis Roughing is a new strategy added for X8. It allows the easy creation of pocketing toolpaths to rough out pockets that have a curved floor surface. It supports offset or Dynamic style strategies, and multiple depth floors.
Please contact:crackcad@gmail.com

Matlab-2014b-download-tutorial

MATLAB® is a high-level language and interactive environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java
MATLAB R2014b introduces a new MATLAB graphics system. New default colors, fonts, and styles make your data easier to interpret. Anti-aliased fonts and lines provide smoother text and graphics. Graphics objects are easier to use – you can display common properties in the command window, and objects support familiar structure-like syntax for changing property values. Many other new features have been added as well.

Big Data Capabilities

New features and performance improvements target working with big data. The datastore function enables you to easily and efficiently format and import data into your desktop from files – and collections of files – that don’t fit into memory. mapreduce is a programming technique that lets you analyze data sets that do not fit into your computer's memory. These capabilities also scale for use in processing data on Hadoop.
Git and Subversion Source Control Integration

Integration with the popular Git and Subversion source control systems helps keep your code under control, making it easier to build and share custom MATLAB toolboxes. Host your toolbox on GitHub to collaborate with others, and list it on File Exchange on MATLAB Central to make it available to the worldwide MATLAB community.

Please contact  :  crackcad@gmail.com

DP-ESPRIT-v2014-download-crack

ESPRIT is easy to use for quick jobs, yet packed with power to handle the most complex production milling work. Whether you are programming 2 1/2-axis parts or 5-axis machining, ESPRIT will give you the programming power you need and the ease-of-use you are looking for.

    Production Milling with 5-axis Machines
    ESPRIT SolidMill Production adds 5-axis machining capability to ESPRIT's milling cycles. Programmers can use multiple fixture offset with local or global work coordinates to machine any part face, using any ESPRIT machining cycle. ESPRIT's 5-axis indexing supports any combination of rotary tables and tilting heads to orient the part, then machines with 2 1/2 and 3-axis operations using one or more ESPRIT cycles.
Rotary Wrap Milling
ESPRIT rotary milling is performed directly from the 3D features of solid models or from flat 2D features. ESPRIT readily programs rotary contouring,pocketing and drilling utilizing a simultaneous 4th axis. ESPRIT converts one of the standard 3-axis movements (X, Y, or Z) into a rotary C-axis movement, wrapping the profile around a rotary axis and employing an optional Y-axis offset to ensure straight walls.

    Roughing and Pocketing
    ESPRIT's pocketing cycle provides full tool control and extensive automation for roughing and finishing pockets. ESPRIT can dramatically simplify your programming whether you are machining straight-forward squares or complex pockets with irregular boundaries, multi-level islands, and multiple bosses and sub-pockets. The broad variety of pocket machining and finishing patterns provided by ESPRIT yields virtually unlimited options for your pocket milling needs.
    Contouring
    CNC programmers find ESPRIT's contour machining cycle a flexible and powerful tool for a variety of machining applications, ideal for profile cutting, roughing, slotting, semi- finishing and finishing straight or tapered walls with constant or variable cutting depths. Simply set your machining parameters and ESPRIT will read the feature properties required to create the toolpath for cutting any geometry. For more comprehensive tool control, ESPRIT will manage individual tool movements while providing you control over individual machining parameters at any point during the cut.

    Rest Machining
    ESPRIT's intelligent rest machining cutting cycle automatically recognizes the machining operations and cutting tools associated with a given part feature, compares the workpiece 'as machined' to the original part 'as designed', and automatically performs pocketing and contouring of the uncut areas of remaining material. ESPRIT programmers use the rest machining cycle to easily perform roughing and pre-finishing work with optimal cutting tool choices.

Please contact:crackcad@gmail.com

OPEN-MIND-hyperMILL-2014-tutorial-download

hyperMILL® offers a broad array of options for CAD programming that utilise CAD geometry information (features) in a way that significantly reduces programming times. In addition to assigned geometries, features also include information relevant to machining, such as orientation, surface, depth or starting point. These are defined once and can then be assigned to the machining strategy. If the geometry or stored technology parameters are changed in the middle of a process, the changes need only be made in the feature. They are accounted for automatically when a new calculation is performed.

Customized Process Features enable the definition of company standards for similar geometries, thereby automating the programming process even more. This establishes workflows that are saved as technology macros. They can be used for comparable machining tasks. This is based on process-oriented links between characteristic geometries with freely definable sequences of various machining strategies – from 2D, 3D and 5axis milling to turning
The measure of all (milling) things

5axis technology.

The trendsetting 5axis technology in hyperMILL® can typically yield time savings of more than 25 per cent while lowering tool wear and increasing contour accuracy for more cost-efficient production thanks to continuous machining. Challenging geometries such as high and steep walls require many different tool inclinations in precisely delineated milling areas.

5axis simultaneous machining with hyperMILL® 5AXIS is based on what users are already familiar with: milling with a tilted tool. Yet the machining process is now quicker, the surface results are better and programming is much less complicated. Thanks to easy programming with automatic collision checking and avoidance, this technology can also be used as a solution for many standard milling jobs.

    Highlights

    Easy programming for milling applications with indexed orientation.
    Process reliability due to proven fully automated collision checking and avoidance.
    Multiple tilt strategies are available: 3+2, automatic indexing and 5axis simultaneous machining.
    Familiar 3D strategies, such as Z-level machining or rest machining have been expanded to include 5axis processing.
    A broad spectrum of machining strategies for surfaces, cavities and special machining tasks.
    All 5axis strategies are available in the hyperMILL® interface.
    5axis shape offset roughing and finishing for simple and time-saving programming of shaped and wrapped surfaces.


Please contact:crackcad@gmail.com

OPTIS-SPEOS-CAA-V5-Based-V17-tutorial

This new version includes new measures capability and better report generation enhancing users’ productivity.

Color analysis or headlamp performance check have never been so easy to use.

SPEOS CAA V5 Based V17.0 OSD users will enjoy new functionalities such as Freestyle grid to create optics with more style than ever.

Optical Surface and Optical Lens includes new optical elements for an amazing way to control light.

SPEOS CAA V5 Based Windshield Analysis allows CATIA V5 users to test the compliance of a windshield with ECE R43 and SAE Z26 regulations. It enables the simulation of typical experiments, such as sighting target reflection and transmission.

Moreover it provides optical parameters such as deviation, distortion, refractive power to characterize a given windshield; it also allows users to generate the distortion of an image or a video to find out what the effect of the curvature of the windshield shape will be.

SPEOS CAA V5 Based Windshield Analysis provides windshield manufacturers a powerful engineering tool to improve their development process, to speed up their reactivity and to enhance their support to their customers.

SPEOS CAA V5 Based Windshield Analysis gives car manufacturers a validation tool that can be used at all the stages of the design process saving effort on invalid designs, evaluating the impacts of modification and giving them independence from their suppliers.

Please contact  :  crackcad@gmail.com

CST-Studio-Suite-V2014-sp5-crack

CST STUDIO SUITE comprises the following modules

CST MICROWAVE STUDIO® (CST MWS) is the leading edge tool for the fast and accurate 3D simulation of high frequency devices and market leader in Time Domain simulation. It enables the fast and accurate analysis of antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects etc.

CST EM STUDIO® (CST EMS) is an easy-to-use tool for the design and analysis of static and low frequency EM applications such as motors, sensors, actuators, transformers, and shielding enclosures.

CST PARTICLE STUDIO® (CST PS) has been developed for the fully consistent simulation of free moving charged particles. Applications include electron guns, cathode ray tubes, magnetrons, and wake fields.

CST CABLE STUDIO® (CST CS) for the simulation of signal integrity and EMC/EMI analysis of cable harnesses.

CST PCB STUDIO® (CST PCBS) for the simulation of signal integrity and EMC/EMI EMI on printed circuit boards.

CST MPHYSICS® STUDIO (CST MPS) for thermal and mechanical stress analysis.

CST DESIGN STUDIO™ (CST DS) is a versatile tool that facilitates 3D EM/circuit co-simulation and synthesis

Please contact  :  crackcad@gmail.com

New software for download,tutorials,training

[Other EDA] Mentor.Graphics.Flowmaster.v7.9.2.3.UPDATE.ONLY
 [Autodesk] advanced road design v15.01 for autocad 2014
 [Other CAD/CAM] ProgeCAD 2014 Professional v14.0.10.14 (c) progesoft
 [Other CAD/CAM] CGTECH VERICUT V7.3.3
 [Other CFD] Transvalor Forge NXT 1.0
[Other CFD] COMSOL Multiphysics 5.0
 [BENTLEY] Bentley Structural Synchronizer V8i SS5 08.11.11.4
 [Design_Tools] Architect.3D.Interior.Design.v17.6.0.1004
 [BENTLEY] BENTLEY RAM Elements V8i v13.03.00.117
 [Math Statistics] Wolfram SystemModeler 4.0.1
[Other CFD] STAR-CCM+.v9.06.009
[SolidWorks] SolidCAM.2014.SP3.0.for.SolidWorks.2012-2015
[SolidWorks] SolidWorks  [Other EDA] Atmel Studio 6.2
 [Other CFD] NUMECA HEXPRESS Hybrid 4.1
 [Other EDA] CADVANCE AlphaIII-Design V8.1.5
 [Ship Design] PROTEUS.ENGINEERING.FASTSHIP.V6.1.30.1
 [Autodesk] Novapoint v19.20
 [Ship Design] DNV Nauticus Machinery v11.5
 [Geographic Information] Avenza Geographic Imager v4.5
 [Geographic Information] Avenza MAPublisher v9.5
 [Other EDA] Mathworks.Matlab.R
 [petroleum] TecPlot RS
 [petroleum] TecPlot 360 ex
 [Other EDA] Frontline Genesis 2000 v10.1b1 for win
 [Virtual Reality] FEI AVIZO v8.1.1
 [Other CFD] SFC.DeForm.Premier.v11
 [Other CFD] NUMECA FINE/Open with OpenLabs 4.1
 [SolidWorks] Realhack 3.9 for SolidWorks 2015
 [PTC] PTC Creo 3.0 M010 Multilanguage
 [SolidWorks] SolidWorks Enterprise PDM 2015
 [Development ] Wind River Linux 6.0
 [Development ] Wind River Diab Compiler 5.9.4.1
 [Geological Prospecting ] AGI ODTK 6.3.0
 [Development ] Wind River VxWorks 6.9
 [Other EDA] Ticra grasp 10.1
 [Geological Prospecting ] Analytical Graphics STK Pro v10.1(AGI STK 10.1)
 [Other CFD] Altair SimLab Composer 2015 5.0.2.0
 [Cadence] Cadence MMSIM v14 for linux
[Structural Analysis] Steel&Graphics TecnoMETAL BIM SUITE Ultimate 2015
 [Chemical] Lumerical MODE Solutions Ver.7.1.231
 [DELCAM] Delcam PowerSHAPE 2015
 [SolidWorks] solidworks 2015
 [BENTLEY] Bentley AXSYS.Engine V8i 08.11.11.48
 [UGS] Siemens.Tecnomatix.Plant.Simulation.v11.TR3
 [SolidWorks] Mastercam.X8.for.SolidWorks.HotFix.1.v17.0.16575.10
 [petroleum] TechnoSoft AMPreVA v5.3
 [Other CAD/CAM] Analist 2015
 [petroleum] CMG_SUITE_2013
 [Other EDA] Frontline Genesis 2000 v10.1b for linux
 [Other EDA] CoventorWare
 [Geological Prospecting ] BlueMarble.Geographic.Calculator.
 [petroleum] Tahoe Design PumpBase V3.0
[Geological Prospecting ] LISCAD v11.2
 [BENTLEY] Bentley.AutoPIPE.V8i.SS5.09.06.01.10
 [petroleum] Zeataline Projects PipeData-PRO v9.2.1
 [UGS] Siemens DIGSI v4.89
 [Chemical] Invensys_SimSci-Esscor_DYNSIM_5.0.0.163
 [Math Statistics] MedCalc.v14.8.1.0
 [Autodesk] Autodesk.Feature.Pack.for.Factory.Design.Suite.v2015
 [Chemical] ESI PipelineStudio v3.6.1.0
 [Other CAD/CAM] IronCAD.Design.Collaboration.Suite.
 [Other CAD/CAM] VERO.ALPHACAM.V2014
 [Other CFD] FunctionBay.RecurDyn.v8R3.SP1.Win64
 [Other CAD/CAM] Mastercam X8 HotFix 1 v17.0.16257.0
 [Other EDA] Altium Designer 14.3.15 Build 35511 Multilingual
 [Other CFD] ESI CFD Advanced  2014
[Other CAD/CAM] GibbsCAM.2014
 [Chemical] CAESAR II 2014
 [Other EDA] Eplan P8 PPE v2.4.4.8366
 [Autodesk] Spectra Precision Survey Office v3.21.5275.27127
 [Animation] Rhinoceros v5.9.40609.
[petroleum] Softbits Flaresim v4.0.4.637
 [Chemical] PVElite 2014
 [Autodesk] Transoft.TORUS.v4.0.1.200
 [BENTLEY] Bentley Rail Track V8i 08.11.07.685
 [BENTLEY] Bentley STAAD Planwin 14.00.05.00
 [UGS] Siemens_NX_9.0.3_MP01
 [petroleum] Schlumberger Petromod 2014
 [petroleum] ihs subpump v9.9
 [petroleum] IHS PERFORM v2013
 [Other CFD] Numeca.Fine.Turbo.Design.v91.2
 [DELCAM] Delcam_PowerInspect_ 2014
[petroleum] PLANT-4D v7.7.03
 [Other CFD] CFTurbo.v9.2.7
 [Design_Tools] Transoft_Auto_TURN_Pro_3D_v9.0.1.256
Please contact  :  crackcad@gmail.com   more

New software for download,tutorials,training

[Other CAD/CAM] Geometric Glovius Professional v4.0.0.3
 [Autodesk] AUTODESK.NASTRAN.INCAD.V2015.WIN64
 [Casting ] Cast-Designer v6.2
 [Development ] Intel.Parallel.Studio.XE.2015
 [Animation] RTT Deltagen v12.1
[Mould Processing] Moldex3D R13.0
 [Other CFD] NUMECA FINE_OpenTM 3.1-3
 [SolidWorks] Camnetics Suite 2015
 [UGS] OmniCAD v1.1.0.5 for NX 9.0.x Win64
 [UGS] Siemens.NX.v9.0.3.Update.Only.Win64
 [Dassault CATIA ] CATIA.V5-6R2014.SP3.Update
 [Other CFD] Simulia Abaqus v6.14-1 for win64_linux64
 [Other EDA] Antenna Magus Professional 5.0.1
 [BENTLEY] Bentley Limcon 03.63.01.16 (ex. Microstran)
 [BENTLEY] Bentley Substation V8i SS7 08.11.12.75
 [Other CAD/CAM] ICAM CAMPOST V20
 [Optics] Lumerical FDTD Solutions 8.9.231,FDTD Solutions 2014a
 [BENTLEY] Bentley AXSYS Process V8i v08.11.11.32
 [Autodesk] Autodesk Simulation Moldflow Flex 2015
 [SYNOPSYS] Synopsys Synplify PRO 2014.03
 [Geographic Information] Geocortex Essentials 4.1.3
[BENTLEY] Bentley AXSYS Process V8i v08.11.11.32
 [Autodesk] Autodesk Simulation Moldflow Flex 2015
 [SYNOPSYS] Synopsys Synplify PRO 2014.03
 [Geographic Information] Geocortex Essentials 4.1.3
[Structural Analysis] PROKON.v2.6.53
 [Autodesk] Autodesk Nastran 2015
 [BENTLEY] Bentley.HAMMER.V8i.SS5.08.11.05.61
 [SolidWorks] ElectrodeWorks.2013.SP1.2
 [Other CAD/CAM] Elysium.CADdoctor.EX.v6.0
 [Chemical] Process_Systems_Enterprise_gPROMS_v4.0
 [Structural Analysis] StructurePoint.Concrete.Software.Solutions.2
 [SolidWorks] MasterCAM.X8.v17.0.15029.10.for.SolidWorks.2010-2015
 [Cadence] Cadence CONFRML 14.10.180
 [Cadence] Cadence Physical Verification System (PVS) v14.1
 [Cadence] Cadence ASSURA v6.14.04.16.111
 [SolidWorks] MoldWorks.2013.SP0.2
[Other CAD/CAM] Mastercam X8 for 64bit
 [Other CFD] CD-ADAPCO.STAR-CD.4.22.005
[PTC] PTC Creo Elements Direct Modeling 19.0
 [UGS] Siemens.SolidEdge.ST7
 [petroleum] DNV Phast 7.01
 [Other CAD/CAM] Cgtech.Vericut.v7.3.1
[Virtual Reality] SPEEDTREE_CINEMA_V7.0.7
 [Geographic Information] Graphisoft ArchiCAD v18
 [Math Statistics] MedCalc.v13.3.0.0
 [PTC] PTC Creo 2.0 M120 With Help Center Multilang
 [Other CFD] CFTurbo.v9.2.6 
[Structural Analysis] CSI Bridge 2015 v17.0.0.1083
 [petroleum] OLGA.v7.3
 [Other CAD/CAM] Planit Edgecam 2014 R2 
[Structural Analysis] S-FRAME.Structural.Office.11
 [Structural Analysis] CSI SAP2000 v17
 [Other CAD/CAM] EUKLID 13 CAD CAM
 [DELCAM] Delcam.ArtCAM.v2013 [Other CAD/CAM] OneCNC.XR5
more

wroknc 22,hypermill 2014 tutorials

 [Other CAD/CAM] OPEN MIND HYPERMILL 2014
 [Other CFD] CEI.Ensight.v10.1.1b
 [UGS] Siemens Tecnomatix Jack 8.2
 [UGS] Siemens Tecnomatix Plant Simulation v11.1 TR2
 [Other CFD] EDEM 2.6
 [BENTLEY] Bentley.SACS.V8i.SS3.v5.6.2.3
 [petroleum] TecPlot 2014
 [MENTOR] Mentor.Graphics.AMS.v13.1
 [BENTLEY] Bentley Rail Track V8i 08.11.07.615
 [Casting ] AnyCASTING v6.0
 [Structural Analysis] Graitec Advance Suite 2015
 [petroleum] Rocscience Dips v6.008
 [Other CFD] SimLab Compose 2015
 [BENTLEY] Bentley promis•e V8i v08.11.12.101
 [AGILENT] Agilent GoldenGate RFIC Simulation Software 2013
 [Control] Simatic HMI WinCC v7.3
 [BENTLEY] AutoPLANT i-model Composer V8i 08.11.09.14en
 [BENTLEY] Bentley ProjectWise V8i
 [AGILENT] Agilent Genesys 2014.03
 [Other CFD] Siemens FEMAP v11.1.2
 [Other CFD] Altair SimLab 13.1 for win64
 [Optics] OPTIS SPEOS CAA V5 Based v17
 [BENTLEY] Bentley gINT V8i 8.30.4.214
 [Geographic Information] Paradigm 14
 [Math Statistics] WOLFRAM RESEARCH MATHEMATICA v10
 [BENTLEY] Bentley AutoPIPE Vessel V8i v33.02.02.03
 [BENTLEY] AutoPLANT Modeler V8i for x64
 [Other CAD/CAM] FTI FormingSuite 2014 SP1 build 1956
 [petroleum] Petroleum Experts IPM v9.0
 [Structural Analysis] Nemetschek Allplan 2015
 [SolidWorks] SolidCAM 2014 SP2.0.59019
  [SolidWorks] FTI BlankWorks 6.1 for SolidWorks 2014
 [Other CAD/CAM] DP Esprit 2014 R2
 [BENTLEY] Bentley Descartes V8i SS5 08.11.09.601
 [Other CAD/CAM] ISD_HiCAD_and_HELiOS_v2014_SP1
 [Other CFD] csimsoft Trelis v15.0 TUTORIALS
 [DELCAM] Delcam.Exchange.2015
 [Mould Processing] AutoForm Plus R5.2.0.11
 [BENTLEY] Bentley.RAM.Structural.System.V8i.v14.06.02.00
 Bentley.RAM.Concept.V8i.v05.01.01.10
  [Other EDA] YDC CADVANCE αIII V6.1
 [Structural Analysis] CSC.Fastrak.2014.v15.0.2.1
  [Other CFD] LMS.Test.Lab_rev13A_tutorials
 [Other CFD] IES.VisualAnalysis.v11.00.0008
  [Other CAD/CAM] MasterCAM.X7.MU2.SP1.Update
  [Structural Analysis] CSC.Tedds.2014.v16
 [Other CFD] BETA.CAE.Systems.v15.1.0.Tutorial
 [Other CAD/CAM] GibbsCAM.2014.10.7.11.0
 [Other CFD] CD-ADAPCO STAR-CCM+ V9.04.009
 [Casting ] ESI ProCAST v2014
  [ADOBE] Adobe Photoshop Creative Cloud 2014
[Structural Analysis] Tekla Structures 20.0.14.366 SR4 for 64bit
  [Geographic Information] Geocortex.Essentials.v4.1.tutorials
 [Dassault CATIA ] Dassault Systemes GEOVIA Minex v6.3.306
 [Biomedicine] Materialise.Mimics.Innovation.Suite.v17.0
 [Design_Tools] Ricardo Suite 2014.1
 [Design_Tools] AVL Suite 2014
  [Chemical] Aspen Technology AspenONE v8.6
  [SolidWorks] SolidWorks 2014 SP4.0
 [Optics] TracePro 7.4.3 for 64birt_32bit
 [Other CAD/CAM] VoluMill NEXION v6.1.0.2193
 [Other EDA] Infolytica MagNet v7.5
 [BENTLEY] Bentely Hevacomp 26.00.00.3
[petroleum] Furgo Jason V8.4
[Geographic Information] Paradigm EPOS V2014 stratimagic
[ petroleum] GeoGraphix Discovery 2014 landmark
[Cadence] cadence Incisiv IUS 13.20
[Cadence] cadence CONFRML 13.10
[Cadence] Cadence Physical Verification System (PVS) v13.1
[Other CAD/CAM] Moldplus_10_7_for_Mastercam_X7
 [Other CAD/CAM] Robotmaster_V6.1.4048
 [Dassault CATIA ] 3DVIA.Composer.v6R2014x.T2
 [UGS] Siemens.LMS.Samtech.Wind.Turbines.rev15.SL1
 [UGS] Siemens.LMS.Samcef.rev15.1-1.Win64
 [Other CFD] FiberSIM.2012.SP1.HF5.for.CATIA.V5.R18-R2
 [PTC] PTC.Creo.3.0.F000.Full.Multilanguage.download
 [Animation] Rhinoceros.v5.5.Corporate.Edition
 [Geological Prospecting ] PCI.Geomatica.2013.SP3
 [SolidWorks] CAMWorks.Nesting.2014.SP0.1.for.SolidWorks.2013-2014
 [Other EDA] CST Studio Suite 2014 with SP2
 [Nonlinear] THE FOUNDRY MODO V801 SP1 WIN64
 [Other CAD/CAM] Geometric eDrawings Pro 2014 Suite
 [Geological Prospecting ] Global.Mapper.v15.2.3
 [Other CAD/CAM] CAMWorks.2014.SP2.0.for.SolidEdge
 [Other EDA] Altium.Designer.v14.3.10
 [BENTLEY] Bentley.SewerCAD.V8i.SS4.08.11.04.54
  [petroleum] Senergy Interactive Petrophysic v4.2