simetrix-v5.6

Circuit Simulation Software

SIMetrix Technologies provides reliability, ease of use and accuracy in a range of professionally-packaged circuit simulation tools.

With industry-proven performance and technical support to match, SIMetrix Technologies offers an affordable alternative to unsupported freeware and high-priced EDA solutions.
Mixed-mode simulator, superior convergence and speed

Convergence is often a problem with many simulators especially in power electronics. This is because the wide range of currents, voltages and conductances present in power circuits stretches the precision of the underlying algorithms. Many other products have to be coaxed into completing such designs by requiring the user to experiment with various option settings. This is rarely necessary with SIMetrix and is the result of over 15 years of development on the core algorithms and model equations along with real world experience in simulator use.
Extended sweep modes

SIMetrix has six sweep modes applicable to DC, AC, Noise and Transfer Function analyses whereas SPICE has just one for each. For example you can sweep a voltage source at a constant frequency in AC analysis with SIMetrix but not other SPICE programs.
Real time noise analysis

Applies noise in transient analysis. This unique feature makes it possible to analyse noise in oscillators and sampled data systems. Requires SIMetrix Micron A-D or SIMetrix/SIMPLIS Micron
Transient snapshots

Stores the circuit state at any point during a transient run. Result can be used to initialise an AC analysis. Useful for investigating the stability of circuits in operating conditions that cannot be obtained using a DC analysis. Requires SIMetrix Micron A-D or SIMetrix/SIMPLIS Micron
Model support for IC design

Includes, BSIM3, BSIM4, MOS9, MOS11, PSP, Mextram, Hicum, EKV and VBIC models, schematic support for L/W editing. Requires SIMetrix Micron A-D or SIMetrix/SIMPLIS Micron
HSPICE model file compatible

Includes: support for HSPICE syntax for parameter expressions; .LIB/.ENDL support; process binning; .GLOBAL; LEVEL 49 and 53 BSIM3 model parameters. Requires SIMetrix Micron A-D or SIMetrix/SIMPLIS Micron
Fast Monte Carlo analysis

SIMetrix has possibly the fastest Monte Carlo analysis of any PC based product. Unlike other simulators, the SIMetrix Monte Carlo feature is built into the simulator core making it possible to use algorithms that avoid unnecessary repetition.
Sophisticated tolerance specification

As well as high performance SIMetrix also provides sophisticated tolerance specification allowing simple cases to be setup quickly while providing the flexibility needed for large IC designs. SIMetrix also features a facility to create histograms of analysis data using a wide range of goal functions.
Multi-step analysis

Repeats an analysis while varying some circuit variable using one of six modes.
Safe Operating Area (SOA) analysis

Displays violations of voltage, current or power limits as the simulation runs.
Non-linear magnetics with support for air gaps

Two models are available: the Jiles-Atherton hysteresis model and a simple non-hysteresis model.
Power models

Built-in IGBT model compatible with PSpice.

Full support for Infineon physics based models including CoolMos and Optimos devices.

New soft recovery diode model. Includes parameter extraction facility to create models from data sheet values.
Transient restart

Transient analysis can be restarted after the stop time has been reached. Useful when a circuit takes longer to settle than originally expected.
The SIMetrix Environment
Design Entry

Integrated hierarchical schematic editor designed exclusively for simulation and so is not burdened by features needed only for PCB design.

PSpice "Schematics" Translator SIMetrix can directly read in schematic and symbol files from the PSpice "Schematics" program. (The original Microsim program not Orcad Capture).
Comprehensive schematic cross-probing.

Just point and click to plot a voltage, current or device power before, during or after a simulation run.
Waveform Viewer

Powerful waveform viewer with all the features you would expect from a professional circuit simulation package including multiple grids and axes, cursor measurements, annotation features and smart analysis functions.
Models

Parts browser with full support for external SPICE model libraries. Displays a categorised list of parts for easy placement onto the schematic.

Drag and drop SPICE model installation. Just pick up a SPICE model file in windows explorer and drop into SIMetrix. SIMetrix is compatible with 99% of available SPICE models.

atrenta-SpyGlass-v4.2

Using advanced static and dynamic analysis, the SpyGlass® solution pinpoints structural, coding and consistency problems at RTL. In addition, the solution offers the industy's most comprehensive solution for analysis of clock, reset and clock domain crossings (CDC). It traces problems to their source, helps users resolve issues before they creep into downstream design implementation. The SpyGlass solution also helps address electrical rules (ERC) in the design.

Slashing the Risk of Complex IC Development
The SpyGlass solution greatly reduces the risk of developing complex multimillion-gate, nanometer-scale ICs, enabling companies to build better products, faster and more economically. The SpyGlass solution accurately detects design issues at the point of creation. In traditional flows, such problems are typically discovered much later, at the gate level, if at all, after much time and expense have been invested in the design. With the SpyGlass solution, designers can optimize designs at RTL, when the ability to make enhancements is greatest and the cost of modifications lowest. And the SpyGlass solution flags areas of the design that are likely to present implementation challenges, so that appropriate resources can be applied to mitigate schedule and complexity risk.

In detecting problems and helping effect their resolution, the SpyGlass solution leverages decades of accumulated design experience. It integrates a large base of industry-standard best practices, as well as Atrenta's own extensive experience working with industry-leading customers. It includes design reuse compliance checks such as STARC and OpenMORE to enforce consistent style throughout the design, ease the integration of multi-team and multi-vendor IP and promote design reuse.

The Methodology
Atrenta's SpyGlass solution methodology provides a structured, easy to use and a comprehensive method for solving RTL design issues, thereby ensuring high quality RTL with fewer but meaningful violations.

Provides methodology documentation and rule-sets as part of the product
Provides an infrastructure for rule selection and customization aligned with design milestones
Walks users through a series of recommended steps to ensure design compliance to HDL standards, coding style, synthesis, simulation, verification, connectivity finite-state machine, clock and reset issues
This step-by-step approach detects and fixes design bugs in alignment with design milestones, and ensures predictable design closure without any last minute surprises or a high volume of violations

Features & Benefits
Sophisticated static and dynamic analysis--identifies critical design issues at RTL
Industry-leading comprehensive clock, reset and clock domain crossing (CDC) analysis
A comprehensive set of electrical rules checks to ensure netlist integrity
Customizable framework to capture and automate company expertise
High performance and capacity to rapidly analyze complex, multimillion-gate designs
Integrated debug environment enables easy cross-probing among violation reports, schematic and RTL source
The most comprehensive knowledge base of design expertise and industry-standard best practices
Supports Verilog, VHDL, V2K, SystemVerilog and mixed-language designs

MVTec- HALCON-v9.0.1

HALCON 9.0 licenses are also valid for HALCON 9.0.1. In contrast, all HALCON 8.0 licenses must be replaced or upgraded. Please contact your local distributor.

o HALCON Library

HALCON 9.0.1 is fully compatible with HALCON 9.0. Compared to HALCON 8.0, many extensions have been introduced. Thus, the HALCON 9.0.1 libraries are not compatible with HALCON 8.0 or earlier versions.

o HALCON Applications

Applications (i.e., executables) developed with HALCON 9.0 can be used with HALCON 9.0.1, i.e., HALCON 9.0.1 is binary compatible with HALCON 9.0.

The incompatibility with HALCON 8.0 or earlier versions mainly concerns the binaries, with only few changes in the language interfaces. If you encounter problems during recompiling your programs, please check the detailed description of changes below and for HALCON 9.0, respectively.

Please note the following source-code incompatibilities:

* Because problems concerning erroneous calculations for the polynomial camera model have been fixed, all camera parameters using the polynomial camera model obtained by camera_calibration or binocular_calibration cannot be used anymore and must be recomputed. Additionally, all 3D shape models, descriptor models, deformable models, and sheet-of-light models using the polynomial camera model must be recreated.
* Applications that use the operators find_uncalib_descriptor_model or find_calib_descriptor_model might need adapted parameter values because of the new point matching algorithm.
* Applications that use the operator points_lepetit might need adapted parameter values because of the modified score calculation of this operator.
* The output of gen_arrow_contour_xld for point pairs with identical start and end points has been changed so that now an XLD consisting of a single point is returned.
* Because problems concerning the assignment of the axes shown in the '3d_plot' paint mode have been fixed, all applications that supply a quaternion in the call to set_paint must be adapted.
* Because the error messages for wrong input control parameters returned by zoom_image_factor and zoom_image_size have been corrected, programs that evaluate the returned error messages must be adapted accordingly.

Please note that applications using HALCON/.NET (and HDevEngine/.NET) have local copies of the corresponding assemblies (halcondotnet.dll etc.). After installing HALCON 9.0.1, these applications would therefore still use the old HALCON versions. You must either replace the assemblies manually or re-compile the projects.

Pipeline-Studio-v3.2 llicense

PipelineStudio is the industry-leading pipeline design and engineering solution that combines graphical configuration and reporting tools with industry-proven simulation engines. It provides fast, accurate, robust and reliable answers to a wide range of steady-state and transient analysis challenges.

PipelineStudio delivers rapid and accurate offline design, planning and hydraulic analysis for natural gas and liquid pipelines through advanced state-of-the-art simulation techniques. The combination of both steady-state and transient hydraulic simulation within a feature rich Windows graphical interface enables better understanding of even the most demanding problems by providing appropriate analysis of the process. PipelineStudio has been proven to be an effective decision support tool that really can deliver financial benefit to your organization.

Its familiar Windows look and feel makes it easy to use right out of the box. Workflow enhancing techniques such as templates and complexity management along with a comprehensive set of pipes and pipeline equipment enable rapid configuration of robust and accurate models of your whole pipeline network. And once PipelineStudio has constructed an engineering model of your pipeline network, the same model can be integrated into custom applications, or other EnergySolutions products, to enhance specific business processes and your financial performance.

Use PipelineStudio for:

* Flow assurance
* Designing, routing, sizing of pipeline networks
* Upset, leak and survival time analysis
* Strategic, operational and capacity planning
* Rapid assessment of unscheduled changes in operation
* Operational prognosis
* Compressor requirements
* Fuel consumption calculations
* Line pack management
* Assessment of storage requirements
* Surge Analysis

LMS-RAYNOISE-v3.1 license-crack

LMS RAYNOISE
Computer-aided refinement of building acoustics…


A successful building project is one which combines aesthetic appeal with a practical functionality. But how can you guarantee that people can talk to each other in comfort – or understand an important announcement? Can you be sure that a new housing development will not suffer from highway noise – or the factory that you want to build? Will the audience in cinemas, theaters, and concert halls be amazed at the exquisite sound quality – or be shocked by the echoes, flutters and muffled production? It is so easy to make a mistake – and fixing an acoustic problem by palliative treatments is very, very expensive.


LMS RAYNOISE is a computer-aided acoustic design and analysis system for the architect or building acoustician. It uses advanced acoustic ray tracing methods to predict the sound field produced from multiple sources at any location inside a 3D space and in the far field outside. It automatically handles complex interactions - such as multiple reflections from different surfaces. The results are shown in a variety of ways – from 1/3 octave spectra and echograms, to colormapped SPLs and a choice of sound quality metrics. You can even listen to how a performance would sound from any seat in the auditorium using binaural playback.


LMS RAYNOISE enables you to model, design, and even optimize the acoustic character of your project while it is still on the drawing board. You’ll be able to make well informed concept decisions; examine more candidate designs – and avoid the flawed concept altogether.

SURFCAM-Velocity-2009-v4.0-sp1

SURFCAM Velocity® 4 SP1, Powered by TrueMill® is now available to the public. This powerful release contains new features as well as enhancements from the SURFCAM user-base such as direct reading of SolidWorks Sketches, improved toolkits, and enhancements to 4-5 axis cutting. Click here to download Velocity 4 SP1 or contact your dealer for more information.

Among the features implemented in Velocity 4 are: brand-new 3-Axis High-Speed Machining strategies, top-quality HSM operations including Rest Machining, Offset Pencil Cut and 3D Offset. With Velocity 4’s new 4- and 5-Axis functionality, you gain total control of the tool motion during any event of the cutting process, thus ensuring best cutting conditions and safe tool motions.
SURFCAM offers true simultaneous 4- and 5-axis machining, full visualization and verification. This enables the NC programmer to gain precise control over every aspect of multi-axis machining, ensuring safe tool motion in the most challenging applications. 4/5-Axis provides support for all standard tools with collision checking, avoidance, toolpath containment -- and more.

4/5-Axis Product highlights include: Milling Software Velocity Powered by TrueMill

* Multi-surface 4 and 5-axis machining.
* Full tool and shank gouge protection ensures safe tool moves in the most challenging applications.
* Full support for multiple gouge check strategies -- up to four separate groups of check surfaces.
* Control of surface gap and stepover handling, including lead in and lead out options.
* Retract options including plane, sphere and cylinder for increased tool control.
* Powerful tool axis control during swarf cutting.
* 5-axis drilling capabilities.
* Tool plane locking and limiting for enhanced control.
* Advanced vector control to provide toolpath optimization.
* Full visualization and verification.

Golden.Software.Surfer.V9.5.510

Surfer is a contouring and 3D surface mapping program that runs under Microsoft Windows. It quickly and easily converts your data into outstanding contour, 3D surface, 3D wireframe, vector, image, shaded relief, and post maps. Virtually all aspects of your maps can be customized to produce exactly the presentation you want. Producing publication quality maps has never been quicker or easier.
Transparency!

See all your data! Make colors, map layers, fill patterns, images, and missing data for image maps and shaded relief maps transparent! You have full control over the opacity percentage.
Import and Export Georeferenced Images!

No more guesswork! Save time and frustration by importing georeferenced image files in their real world coordinates, ready to combine with other map types. Also export your maps as georeferenced images files! You can save the spatial reference information in Golden Software Reference format, internal referencing format (ie. GeoTIFF), with an ESRI world file, or Blue Marble RSF format!
Add, Remove and Edit Individual Objects in Base Maps!

Surfer 9 adds the ability to expand your base maps to show you all the individual components of the base map! You can add, copy, paste and delete objects from a base map, or double click on a particular object to edit its individual properties. You can even reshape polylines and polygons in a base map! You can still collapse the base map, double click on Base and globally change the properties for all items in the map.
Convert the Projection of Data in the Worksheet!

Project your data from more than 1,500 predefined coordinate systems or define your own custom projection or datum! Add frequently used coordinate systems to your Favorites list to be easily accessible in the future.
Convert the Projection of Data in the Worksheet!

Project your data from more than 1,500 predefined coordinate systems or define your own custom projection or datum! Add frequently used coordinate systems to your Favorites list to be easily accessible in the future.
Length and Area Calculations!

Area and length calculations are here! Surfer reports the area and perimeter length of polygons and the length of polylines in a base map. Simply double click on the polygon or polylines and the information is reported. The polygons and polylines don�t even have to be a part of the original base map file. Import the base map, enter the base map group and simply draw the polygon or polylines right on the base map! It�s that easy to get area and length values

2009 08 crack software ftp download

2009-08-30 InventorCAM 2010
2009-08-30 Bentley.RAM.Structural.System.V8i Release 14.00.01.00
2009-08-30 SURFCAM Velocity 2009 v4.0 SP1 build 248
2009-08-28 MSC.PATRAN.V2008.R2
2009-08-27 The.Foundry.Nuke.v5.2.1
2009-08-26 SPSS.Amos.v18
2009-08-25 Cimatron Elite v9.SP1
2009-08-25 EMIT.Maxwell.v5.0.3.5607.Incl.Keygen
2009-08-24 MecSoft.VisualMILL.Professional.v6.0.5.14.for.VisualCAM
2009-08-24 MecSoft.VisualART.v1.0.2.1.for.VisualCAM
2009-08-23 Aquaveo.GMS.v7.0
2009-08-22 Delcam ArtCAM 2009 SP2 build 176
2009-08-20 PTC Pro ToolMake v9.0 M030
2009-08-19 PGI.Workstation.Complete.v9.0.3
2009-08-19 IVS.3D.Fledermaus.Professional.v7.0.0d.258
2009-08-17 DASSAULT.SYSTEMES.CATIA.V5R19.SP5
2009-08-16 GIBBSCAM.2009.V9.3.14
2009-08-15 PTC.PRO.ENGINEER.WILDFIRE.V4.M100.Win32.&64
2009-08-13 AUTODESK_MAYA_V2010
2009-08-13 CORE.TECHNOLOGIE.3D.EVOLUTION.V2009.SP1
2009-08-12 SIEMENS.NX.V6.0.3
2009-08-12 iMold v9 SP0
2009-08-11 Luxology.modo.401.SP1.WIN.OSX
2009-08-11 Gurobi.Optimization.Gurobi.v1.1.2.Cracked
2009-08-10 Smith_Micro_Poser_v8.0
2009-08-10 Siemens.Tecnomatix.v9.0
2009-08-09 CD-adapco.Star-CCM.Plus.v4.04.Windows32&Linux
2009-08-08 SIEMENS.NX.I-DEAS.V6.M2
2009-08-08 CAPVIDIA_3DTRANSVIDIA_V2009
2009-08-07 TEKLA.STRUCTURES.V15.SR2
2009-08-07 GS AFES Professional v3.0 070809
2009-08-07 LMS.Test.Xpress.V3A.SL1
2009-08-06 Zona.Zaero.V8.2
2009-08-06 Bentley.CivilStorm.V8i.08.11.00.08
2009-08-05 Codev v10.1
2009-08-04 Arup.Oasys.v9.3.1
2009-08-04 Xceed.Ultimate.Suite.2009.v3.2.9373.Incl.Keygen
2009-08-04 3DVIA.Composer.2010.v6.4.0.1411
2009-08-03 CSI.SAP2000.V14.1
2009-08-01 MicroSurvey.CAD.2010.v10.0
2009-08-01 PLANIT_EDGECAM_V2009_R2
2009-08-01 THERMOANALYTICS_RADTHERM_V9.2
2009-08-01 GNS_ANIMATOR4_V1.1.4
from caxcrack
2009-08-30 CoDeveloper.Universal.3.50.b.3
2009-08-27 Sonnet.V12.52
2009-08-26 Synopsys.ns_hsim_xa_vC-2009.06
2009-08-25 BluePrint-PCB.v2.0.1.422.with.CAM350.v10.0.1.316
2009-08-23 Synopsys.CoreTool vB-2008.Linux
2009-08-23 Ansoft.Links.v4.2
2009-08-23 Ansoft.siwave.v4
2009-08-19 CLC.Genomics.Workbench.v3.6.5 For win &Linux
2009-08-15 Cadence IUS V8.2
2009-08-15 Denali.PureSuite.V3.2
2009-08-13 Synopsys.VCS.MX-2009.06
2009-08-11 Synplify FPGA 200906
2009-08-05 Altium Designer Summer 2009 Build9.0.0.17654
2009-08-04 Denali.PureSuite.V3.2.062
2009-08-02 DownStream CAM350 v10.0.1.314
2009-08-02 DownStream BluePrint-PCB v2.0.1.418
2009-07-30 ARM SOC DESIGNER 7.1
2009-07-29 CoWare.Processor.Designer.V2009.1
2009-07-29 CoWare.Signal.Processing.Designer.v2009.1
2009-07-27 Cadence CONFRML V8.1
2009-07-24 Mentor.Graphics.PADS.Flow.9.0.1
2009-07-24 Novas 2009.07
2009-07-23 Mentor Graphics Precision Synthesis v2009a
2009-07-22 Simucad 2009
2009-07-19 HDL.Works.HDL.Design.Entry.EASE.v7.2.R8
2009-07-18 AWR.Design.Environment.v8.06
2009-07-16 Synopsys TetraMax 2008.09 SP5
2009-07-15 Magma FineSimPro 2008.09
2009-07-14 Synopsys.Sold.v2009.4
2009-07-13 Cadence LDV v5.16
2009-07-12 Cadence_IC v6.13
2009-07-11 Aldec.ALINT.2009.02
2009-07-10 Agilent.Genomic.Workbench.v5.0.14
2009-07-01 SpeedXP Suite V8.0
GMG-MESA.v11.01
Asphalt.Test.Report.System.v4.0.0046
FRI.Device.Rating.Program.V1.4.0
Gedco.Vista.Seismic.Processing.V9.00
IPM.Petroleum.Expert.v7.10.Build143
Paradigm.Sysdrill.v2009
Intergraph SmartPlant Enterprise 2007
COADE TANK V3.10
Applied.Flow.Technology.Impulse.v4.0.2009.07.17.Cracke
Applied.Flow.Technology.Fathom.v7.0.2008.12.03.Cracked
Applied.Flow.Technology.Arrow.v4.0.2008.12.0
Applied.Flow.Technology.Engineering.Utility.Suite.v2.0.2008.01.15
CambridgeSoft.ChemOffice.2010.v12
Wavefunction.Spartan.08.v1.2
Wavefunction.Odyssey.College.Chemistry.v3.1.Cracked
Process.Systems.Enterprise.gPROMS.v3.15.
Midland.Valley.Move.V2009.1
PetrisWinds Recall 5.2 system
Hampson-Russell.CE8.R4.2
GEMCOM.Minex.V5.3
Temis Suite 2008
Seismic Processing Workshop v2.2.10
Discover v.10.1
Discover3D v.4.0.77
Paradigm Interpret 2008
PvtSim V18 (c)CALSEP
HEXTRAN v9.1
Kingdom Suite SMT 8.3
Omni 3D Design v8.0
HAZOP phapro6
Micromine v11
CGM Studio 9.5 Larson Software Technology
Tempest 6.5
PipeDataPro v8
Roxar_IRAP_RMS_2009
Geolog 6.7
Geoframe 4.4
Golden.Software.Surfer.V9.5.510
Eclipse 2008.2
DNV Phast and Safeti v6.51
Kappa Emeraude 2.42.10
SubPump V9.1
IHS.QUESTOR.v9.4
VMG Sim V4
Plant-4D v7.703
Vista V8.0 2D/3D Seismic Processing
Interactive petrophysics 3.5 (c)Schlumberger
PetrisWinds Recall 5.2 system
Pipe flow expert 2008
Schlumberger.FracCADE.V5.10
SCHLUMBERGER.PIPESIM.V2008
Petrel 2009.1 FOR Win32&Win64
Schlumberger TDAS 6.1.6
Schlumberger.Drilling.Office.V4.0
COADE CADWorx 2010
Eclipse 2008.2
IHS_DEEPE$T_3.7
SIMSCI PRO II v8.2 Patch 2
AspenONE Suite v7.1